Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw

Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw


A rivet is a permanent mechanical Rivet, Semi tubular rivet, Insert thread nut,Rivet tool nut, Blind rivet stud, Blinding post screw fastener.rivet Before it is Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw installed it rivet consists of a smooth cylindrical shaft with a head on one end.rivet The end opposite the head is Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw called the buck-tail.rivet On installation the rivet is placed in a pre-drilled hole.rivet Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft rivet diameter Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw and holds the rivet in place.rivet To distinguish between the two ends of the rivet, the original head is called Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw the factory head rivet and the deformed end is Rivet, Semi tubular rivet, Insert thread nut, Rivet tool nut, Blind rivet stud, Blinding post screw called the shop rivet head or buck-tail rivet.

Contact Us
Flat Head lnsert Nuts
TYPE :

Open end, Closed end

Knurling/No Knurling body

Size: M3~M12 or #6-32UNC~1/2”-13UNC

Material : Steel, Stainless Steel, Aluminum.

Finish : Yellow Zinc, Zinc, Zinc with Chrome three (Cr6+ free)

Special finish or material available upon request.


FLAT HEAD RIVET NUT FASTENER

EF SERIES
M
THREAD
SIZE
D (mm)
+0
-0.1
HD(mm)
±0.2
HT (mm)
±0.2
L (mm)
FOR USING IN
MATERIAL
THICKNESS (mm)
M3P0.5
5.0
8.0
0.7
9.5
0.5~2.0
M4P0.7
6.0
9.0
0.8
10.5
0.5~2.5
M5P0.8
7.0
10.0
1.0
11.5
0.5~2.5
M6P1.0
9.0
13.0
1.5
14.5
1.0~3.0
M8P1.25
11.0
14.5
1.5
16.5
1.0~3.2
M10P1.5
13.0
19.0
2.0
22.0
1.0~4.0
M12P1.75
16.0
23.0
2.0
28.0
1.5~5.0
             

KFMSERIES
M
THREAD
SIZE
D (mm)
+0.15
-0.00
HD(mm)
±0.25
L (mm)
±0.38
FOR USING IN
MATERIAL
THICKNESS (mm)
M4P0.7
6.75
9.91
11.43
0.5-2.0
M4P0.7L
6.75
9.91
12.70
2.0-3.3
M5P0.8
7.60
10.54
12.83
0.5-3.3
M5P0.8L
7.60
10.54
15.62
3.3-5.7
M6P1.0
10.00
12.70
15.49
0.7-4.2
M6P1.0L
10.00
12.70
18.03
4.2-6.6
M8P1.25
13.50
17.40
18.42
0.7-3.8
 
M8P1.25L
13.50
17.40
21.34
3.8-7.9
 
M10P1.5
13.50
17.40
18.42
0.7-3.8
 
M10P1.5L
13.50
17.40
21.34
3.8-7.9
 
M12P1.75
17.45
21.97
30.40
1.6-5.1
 
M12P1.75L
17.45
21.97
34.21
5.1-8.9
 
M12P1.75LL
17.45
21.97
38.02
8.9-12.7

KFI
SERIES
M
THREAD
SIZE
D (mm)
+0.006
-0.000
HD(mm)
±0.010
L (mm)
FOR USING IN
MATERIAL
THICKNESS (mm)
 
# 6-32UNC
0.2656
0.390
0.450
.020-.080
# 6-32UNC L
0.2656
0.390
0.500
.080-.130
# 8-32UNC
0.2656
0.390
0.450
.020-.080
# 8-32UNC L
0.2656
0.390
0.500
.080-.130
#10-24UNC
0.2969
0.415
0.505
.020-.130

#10-24UNC L

0.2969
0.415
0.615
.130-.225
#10-32UNF
0.2969
0.415
0.505
.020-.130
 
#10-32UNF L
0.2969
0.415
0.615
.130-.225
 
1/4”-20UNC
0.3906
0.500
0.610
.027-.165
 
1/4”-20UNC L
0.3906
0.500
0.710
.165-.260
 
5/16”-18UNC
0.5312
0.685
0.725
.027-.150
 
5/16”-18UNC L
0.5312
0.685
0.840
.150-.312
 
3/8”-16 UNC
0.5312
0.685
0.725
.027-.150
 
3/8”-16 UNC L
0.5312
0.685
0.840
.150-.312
 
1/2”-13 UNC
0.6875
0.865
1.197
.063-.200
 
1/2”-13 UNC L
0.6875
0.865
1.347
.200-.350
 
1/2”-13 UNC LL
0.6875
0.865
1.497
.350-.500
 
Our Corporate History│ Rivet│ Blind Rivet│ Binding Post Screws│ Countersunk Head lnsert Nuts│ Flat Head lnsert Nuts│ Hex, Rivet Nut
Standard Blind Rivet Studs│ Special Rivet Nuts│ CNC Appliance│ Tool│Anchor│ 中文│ Home

----------------------------------------------------------------------------------------------------------------------------
NO.389, SEC.2 CHANG-MEI ROAD, HOMEI, CHANGHUA, TAIWAN 508, R.O.C.
TEL:886-4-7331688 FAX:886-4-7331699

http://www.filrox.com
http://www.filrox.com.tw

Copyright © 2009 FILROX INDUSTRIAL CO., LTD.